First no more complaints about the weather (at least for a while). Yesterday was forecast high near 70, light wind and 60% chance of rain, actual three or for periods of light sprinkles (never more than five minutes) light winds and high in the mid 70s. Today was more light winds, beautiful clear skies and high near 80. About perfect except if we were racing sailboats.
The plain for today had been to do less than 20 miles with seven locks and go into the Peterborough Municipal Marina, right down town. Last night I decided that a change was needed. For almost the entire trip I have been getting an accumulation of water in the bilge under the engines. There are stuffing boxes around the drive shaft where it goes through the hull, they are designed to be water lubricated and should leak a very little (or their too tight).
There are three section of the bilge divided by stringers, one under each engine and one in the middle, there is an automatic bilge pump in the middle. The stuffing boxes have been leaking enough that every third or fourth day I would go down and bail the water out, either with a sponge and bucket or use the small shop-vac we have on board. Port engine has been worse than the starboard, but in the last few days the starboard has gotten worse and I need to bail almost daily.
I found in the guide small marina about four miles (and one more lock) beyond Peterborough that showed mechanical services. I called and Tom said he could help us, if we came in tonight he would work on the stuffing boxes in the morning when the engines were cool. I called Peterborough Marina and cancelled our reservation.
With the idea of a relatively long day we got underway a little before 8:00. We cruised the shor


At Lakefield there is a narrow channel around the dam to the lock. We head in and around the



The lock staff said they would leave the gates open and we could go in and tie up, but they had


From here on the next four locks are between a mile and a half and half a mile apart, the lock masters communicate with each other and try to be ready for you. The next two the gate

At the next lock the lower gates were open and they were waiting for boats going the other way.


We were soon through that lock and the next and then it was on five miles to the lift lock. Much of that is in a channel separate from the Ontonabee River; most is remote and scenic until you come to


We had been locking through the earlier locks with a Mainship and a small I/O, we loaded and the lock staff said they would like to get the Island Princess in too. We all squeezed forward and she just got in.
The Peterborough Lock is the highest lift lock in the world at 65 feet, but the operation is the same as Kirkfield. See the Kirkfield entry for details of operation. The biggest differance in the two locks is that Kirkfield has a lot of structural steel and Peterborough is mostly concrete. Because of the problem I have with too many pictures I have created a separate pictures only blog entry of all the pictures from the lift lock.
It was very different to stand on the boat and look down on the roof of the visitor’s center and the cars across the way. Another highlight of our trip.
We proceed down to the next lock only half a mile away and the three of us locke



I have praised the helpful Parks Canada lock staff in the past, today at Lock 19, Scotts Mills; we



We left Chad and had another few miles to the little marina with the mechanic; we got there just before 4:00 closing. It was a long day, but very enjoyable, we are both exhausted.
1 comment:
This has left a smile on my face. You met my childrens favorite lockmaster Ever. They love him he gives them suckers and treats. I wanted to make sure that his name is and Was Chad. NOW I know for sure. We all want to write a letter about him because he is such a great lockmaster. WHat great photos. MOre importantly Im thrilled to see other people are enjoying Chad and his WOnderful STAFF. I just wish that the rest of the lock staffers will follow suit. ENJOY YOUR TRIP
Post a Comment